Maintenance of Bamboo flooring
In my previous article discussed the use of bamboo for the floor, as the sequel I discuss how to care for bamboo flooring. Remove dust regularly with a vacuum cleaner. Maintain your regular bamboo flooring using a special product vitrified flooring. To be avoided: soap and water, detergent-based fats, products containing chlorine or ammonia. If you drop a liquid on bamboo, wipe with a damp mop and then a dry cloth.
Bamboo flooring is very durable, but like hardwood, it requires special care and maintenance to remain in good condition. A bamboo flooring needs to be protected against the elements that could stain, warp, scratch or damage the surface or advice.
Proper care bamboo flooring can go a long way to ensure performance and longevity of the floor. It is important to take preventive measures and simple to clean a part of your daily routine. Read below to learn how you can take care of your bamboo floors and keep good for years to come.
PREVENTION, CARE AND MAINTENANCE
* Clean up spills of liquids and to prevent your floor swelling, cupping or fade. Remember to bamboo flooring dry completely.
* Use of carpeting in high traffic areas or where spills may occur, such as kitchens, entrance halls or bedroom doors.
* Make sure rugs and carpets are colorfast. Dye can bleed and cause permanent stains bamboo flooring.
* Avoid carpets or rubber mats at the bottom. rubber can cause scratches, trapping moisture and prevent the bamboo flooring can “breathe”.
* Keep all carpets clean and dry. Be sure to check underneath frequently to the accumulation of moisture or dirt.
* Remove high heels before walking on bamboo floors to avoid lumps and bumps.
* Keep the nails of your pets or hat trimmed their claws to minimize scratches.
* Use a thick cloth or felt (sticky-back) protective pads under the edges of base cabinets or along the bottom of feet of furniture (chairs, tables, sofas, etc.) to avoid gouges.
* The wheels are small wheels on a swivel, set under a piece of furniture or machinery. They can be made narrow, and / or plastic or metal that can cause rough bumps. To help minimize dents, replace all the wheels with floor protectors or wide, fabric-covered wheels.
* Bamboo floors can fade a little more time. Moving carpets, furniture and other surfaces regularly held on the same natural color change.
* Use blinds, shade screens, or curtains to screen direct sunlight and help prevent fading.
* Keep your warranty to keep track of your humidity. Home humidity levels must be maintained between 35-60%, by using a humidifier or dehumidifier. Too much moisture can lead to bamboo flooring to swell, while too little moisture can cause the ground to reduce or crack.
DAILY CARE AND CLEANING
* Use cleaning products recommended by the manufacturer of your flooring or professional. Failure to do so could void your warranty.
* Before cleaning, broom or vacuum to remove dust, dirt, gravel and pebbles.
* Use gentle cleaning tools such as mops, mops and brooms. When cleaning, make sure the brush is just moist. Vacuum cleaners, especially those with a beater bar, are generally not recommended for most types of bamboo floors.
* Avoid using steel wool, scouring pads, wet sponges, brushes or rags.
* Shake area rugs and carpets out to remove dirt that can be gathered below.
* Wash Vacuum carpets and floor on a regular basis.
* Follow the instructions and recommendations on the floor cleaning product packages carefully.
* Avoid the following: acrylic floor wax or other oil soap, strong detergents, ammonia, vacuum cleaners, or abrasive cleaning powder, corrosive chemicals or other household cleaners .
* To remove the sticky spots, gently rub the floor with a soft, slightly damp.
* Immediately dry the whole area was cleaned with wet products or cleaning tools.
May be useful. forward to next article
Art Deco Style Wood Floor
Display floor of the house with art deco design impressed the net, with sleek lines inspired by the flow of scientific knowledge of aerodynamics or knowledge about the balance of the air force which is generally adapted by ships, buildings, or trains. Display decorative arts are also influenced by cubism and make a cube or from other art.
Design contains elements of art deco floor eclectic, combining classic elements with contemporary. Blending exotic materials with cultural objects from the Egyptian, Mayan or Aztec tribe who came from far east and Africa. What makes this style can be fused is the use of simple shapes, geometric, and abstract are combined with color? Contrasting colors to create a look that looks simple, stylish, yet subtle.
Virtual interior designer colors mention that the game needed to design art deco style. Interior design in the era of the 1920s and 1930s, with ingredients that are not as common as
ebony wood floors, iron, marble, or marble. They often combine materials with color and pattern or a metallic black and gray, to make it look contrasting with the pastel colors are “crunchy” and the bluish color.
In ancient times, fixtures art deco floor designs are not made in bulk, it is made on request by using a type of wood. Layers are rare and expensive, making the design so it looks just perfect for the rich. The new type of plastic such as Bakelite, Lucite, and catalyn made in bulk to be a favorite material in the 1930s. This material replaces the previous material and more affordable for most people.
There used to be a kind of varnish is well-liked and used on any surface of the art deco fixtures
repair and wood flooring specialist, and even worn on the surface of the leather and textile. Other ingredients are also popular but very rarely is a shark skin, snake skin, wrought iron, and steel with a chrome plate. Furniture used in art deco room is usually lower and slightly touching the floor.
While the fabrics for sofas, tablecloths, or curtain has keywords: luxurious and sensual, like silk, satin, velvet, leather and high quality. These materials are usually sewn with a neat and neutral color to balance the design of other colors are more striking accessories to help
repair and wood flooring specialist. “The fabric pattern may vary from Egyptian motifs such as the scarab (a kind of talisman with symbols beetle), lotus flowers and sunshine until chevron motifs, zigzags, and animal skin pattern,” says cyberspace again.
Art deco appearance is usually rather slim. With a pale wood floor is perfect, so did the carpet with bright shades of cream and taupe.
Choosing Bamboo Flooring
Many homeowners know for assured that they do not want to install marmoleum floors, vinyl tile, or carpeting in their homes. In fact, many know from the beginning that they’d like some type of wooden floor in their homes. Nowadays, many homeowners are choosing bamboo flooring instead of a traditional hardwood floor. They realize that bamboo has a lot to offer in terms of look and performance.
Bamboo flooring is somewhat more resistant to moisture than solid wood, so it is perfect for those areas that tend to be a little damper than wood would allow. Given that their appearance is so similar to that of hardwood floors, it seems that bamboo may just be the perfect flooring material,
Bamboo flooring is a highly durable flooring choice for any location subjected to extensive usage and can stand up very well to the abrasion caused by children and pets.
It is tough enough to resist the impact of falling objects in the kitchen as well as in high traffic areas such as the living rooms and hallways. It is also more scratch-resistant than most hardwoods.
Bamboo flooring is actually comparable in hardness and durability to some of the most commonly chosen hardwood flooring materials such as oak and maple.
Bamboo flooring provides a warm environment through its natural growth patterns. While many solid wood flooring materials create beautiful floors, some flooring contractors and homeowners seek a unique appearance that offers the type of look that could be described as “outside the box”. However, they also need a type of flooring that still adds a level of coziness to an interior. Bamboo flooring gives your room a homey touch, providing comfort and warmth with a superior flooring finish.
Bamboo flooring is one of the most environmentally friendly wood flooring options, because it is made from a highly renewable source. It is actually a grass that re-grows after it is strictly monitored and harvested. Bamboo does not require any chemicals for its cleaning and maintenance. Sustainability, renewability, and simplicity of maintenance all make bamboo flooring a very green flooring material indeed.
Bamboo flooring is available in two colors. One is a natural blond color that shows the unique growth patterns that matches every décor. The other color is a rich amber color, a stunningly darker shade achieved by a boiling process that carbonizes the starches found naturally in the bamboo. It is therefore called carbonized bamboo.
Bamboo flooring is among the newest flooring options to appear on the market in the recent years. It is widely preferred by many and is highly appreciated by those who install it. It is tough, versatile, attractive, and affordable, all characteristics a homeowner would look for in the perfect flooring material. Bamboo flooring provides a unique style to your home or office with a beautiful appearance all of its own.
How to clean hardwood floor (Parquet)
It is important not to allow dirt to stick on the wood, often eliminating it clean dust mop or dry cloth. For this task can also use a natural bristle brush for parquet floors only. If there are particles of dirt using a vacuum: the collected without drag, avoiding abrasive effect that can cause scratches on your floor.
Stain when wet wipe, without wetting the wood too.
It is imperative to clean with water, moisture is the enemy of the park and can cause upheavals in the woods.
When you need to mop the wood floor (no more than 1 times per week) try to use products specially manufactured for use on parquet or hardwood floors. Always use the lowest recommended dose. In the absence of a specific product, you can add to the scrub water a splash of vinegar to highlight the brightness and then ventilate the room.
Do not add water products with high acid component or contain waxes or silicones. Its use affects the subsequent rebarnizado. The worst enemy of hardwood floors are some wood products with chemicals or very abrasive, which will eventually take away the shine and generally erode the soil.
Every 2 or 3 months is advisable to sprinkle on a thin layer parquet olive oil with a clean cloth or dragging their feet, this action servitor that wood floors will be dry and super bright.
Today most wood floors are varnished or waxed protected and do not need the old way.
Caring for your parquet
The parquet floors and other such, requires constant care yet simple to keep it always in top condition. More important charge these tips if the park is exposed to high traffic or in an environment where you open the outside door to prevent marks or scratches or treat time and correctly.
Place a doormat before and after each entrance door to the room. Avoid being walked on the parquet floor with shoes wet, dirty with traces of gravel, dirt, mud, etc.. or with fine which may mark blocks.
To avoid scratches and excessive wear in traffic areas or of more use, it is best that you protect these areas with roads or carpets.
In the legs of heavy furniture or move frequently can put a plush, felt or lids to avoid scratching the wood floor. Anyway, avoid dragging heavy furniture, be careful in the process and two or three times a year reviewing these protections in chairs, furniture and doors to prevent scratches.
When you spill liquid on the parquet floor dry immediately with a paper towel and then remove the rest with a barely damp cloth. If you see some liquid has passed under the floor between the openings, use a hair dryer being careful not to burn the wood to remove fluid that has leaked.
It is recommended to keep the humidity between 35% and 65% to avoid shrinkage and expansion of wood and deformity.
If you have humidifiers in the air will prevent the wood from drying and wet periods should be used and ventilation and heating.
Remember that direct sunlight on the parquet floor cause discoloration.
It is possible to avoid closing the curtains on the hours when the sun shines through the windows.
In the event of a scratch to scratch the parquet we carefully apply the scratch, with a very clean cloth, wood-like paste, which you previously prepare to mix it with bitumen to obtain a color close to the park. After the paste to dry scrub with a brush until the scratch is not noticeable.
If the creaking parquet we can use this trick. If the floor has a lot of traffic and wear, with many marks and stains we recommend sanding the entire floor and re-varnish or plasticize. Do not wait until the is damaged or very bad stretch for the sanding is only a few millimeters. Do not wait more than 10 years.
Wood Flooring it’s Style
Today, the flooring market offers you the plenty of flooring options and wood flooring is also a very popular one of them. You can find this type of flooring in wide range of colors, patterns, cuts, and species. Pine, Mahogany, Oak, Cork and Bamboo are some of the popular forms of wood floors.
Oak is the most popular wood used for flooring, although walnut and birch are among other woods people use, and there are a lot of different finishes available, including lacquer, oiled and hand scraped. Thus, you can make the wood quite different according to the type of wood and finish you have. Hardwood floors can create a very warm ambience in a home and that is the reason many people prefer to opt for the wooden flooring.
You will find Oak parquet is available from any firm that supplies wooden flooring, either in solid wood, engineered flooring or laminates. You can install the flooring yourself with a little care and without any hassles. You can chooses from a large range such as Fontainebleau, Canterbury, and Herringbone. Despite the wide variety of wood available in the market, oak is one of the most popular woods. Normally, oak is available in either white or golden finish, either with a hand-scraped or oiled or lacquered finish. They all look very good.
Do you know why many of the experts advise the homeowners to install wood flooring? The simple answer is that wood floors due to their natural characteristics and features are considered as supplies atmosphere friendly and quite safe as well. You may also recycle them and this is surely a great benefit of wood floors. Looking at the benefits of the wood flooring we need to make a very long list. Another positive point of these floors is that they don’t accumulate dirt and other harmful pollutants. That’s why several internationally recognized health institutions recommend the users to go for the wood flooring because according to them they are ought to be just the perfect alternative for healthy household. Generally it has been seen that wood floors do not become a burden on the pocket of the consumer, as they are available at affordable rates in the markets. And we can simply say that wood floors not only preserve their worth but also prove their timeless brilliance and stability
Styles of Wood Floors:
1. Parquet flooring
Parquet floors are those in which the manufacturers assemble wood-flooring pieces together to create fashionable styles and patterns for the consumers. Hard wood is used in making of Parquet flooring and hence it is ideal for the areas that receive high traffic. You can install this flooring in your bedroom; living room, kitchen and children’s bedroom and play room etc.
2. Strip flooring
Strip floors that are also known, the solid linear floors that are usually available in widths of 1 ½, 2 ¼, and 3 ¼ inches. This is also a nice option for you when it comes to install flooring in your new house. You can even consider this type of flooring for your office as well.
3. Plank flooring
The plank floors come in broader width but they are available in linear patterns. You can find this type of flooring in the widths of three, four and five inches. The Red Oak and Northern White Ash are generally used in manufacturing of the plank flooring
Making Parquet Flooring
The length and width of your room are of course careful to meet in meters and centimeters. For the surface in m² of your room, simply multiply the length by the width. We recommend adding 5% of the total obtained for falls and for safety as many walls are not straight.
Each floor is sold in a box which is a specific operation. At the time of your order, simply indicate your area in square meters and our calculator will automatically translate into the number of boxes needed.
Prepare your soil
The surface on which to place your floor must be completely dry and flat. If necessary, straighten your floor with a plaster patching. If your tile is new, be aware that, under ideal conditions, 1 cm of concrete needs to dry one week.
Once the prepared soil, your floor should remain at least 48 hours at room temperature before being placed.
1 / Laying of floating parquet is easier to achieve.
Start by placing strips of plastic film that will prevent rising damp..Overlap the edges and get them back by 5 cm along the walls..Attach the strips together using adhesive tape.
Then place the strips perpendicular underlayment to improve thermal and sound insulation of your floating floor.
Lay the first row of floorboards near a wall, groove side wall, by inserting shims expansion. It is necessary to create this space device to allow your floor to “move” freely.
As appropriate, engage the blades if the prosecutor has a “click system” or carefully apply the glue in the slot and snap the tab. Be sure to use the adhesive recommended for each of our floating floors. Immediately remove the excess with a damp cloth.
To start the second row, use the drop first. Make sure the blades are always separated by at least 50-cm from one row to another. Do this over the entire surface of your room.
Measure the last board by putting a blade on the penultimate. Draw a guide and saw. Remember to consider the expansion joint. Wait 24 hours the glue is dry, remove the hold and put the baseboards without pressure they exert on the floor.
To complete your decoration, World Carpet offers a range of matching accessories for each floor.
2 / The glued
This method is particularly recommended for installation:
the parquet floor heating on a low temperature,
Solid wood floors, where you can choose the pose nailed.
More delicate than floating installation, the installation is stuck rather reserved for professionals or hobbyists notified.
Start by preparing your soil like floating installation.
If you lay your floor on a heated floor, turn off the heat one day prior to installation. Make sure your soil is dry enough (2% maximum humidity) and work in a ventilated room.
Paste the parquet on the floor using a notched trowel. Be sure to use the adhesive recommended for each of our floors. Immediately clean any stains of glue on the surface of the floor.
For the installation of your floor, proceed as for installing a floating floor.
Once the installation is complete, to improve adhesion, it is advisable to put a weight on the floor (not open box or other flooring), especially where the traffic is heaviest.
Wait 24 hours before restarting the floor heating. Set it so that the temperature at the surface of your floor never exceeds 27 ° c. The temperature should, in turn, be between 18 and 24 ° C, at the risk of deforming your floor.
3 / Laying nailed
This method is for solid wood flooring. It is to set the floor with headless nails 60 mm on joists spaced at 40 cm or a former prosecutor.
Nail the first row of floorboards at right angles to the joists, groove to the wall and as close to it, while respecting the expansion joint.
To nail, push the nail at an angle through the tongue and using a nail set so that the next board to fit smoothly. Do this for your entire surface.
When installing the floor is finished, remove the shims and install the baseboards without pressure they exert on the floor.
Properly maintain your floor
Most of our floors, whether the floor bamboo, teak parquet, parquet oak or parquet floor, received a varnish factory. Maintenance is easy. Vacuum, mop and dry with cloth from time to time, a little mop will be sufficient to the daily maintenance of your floor.
For a more in-depth interview, Carpet World offers a range of products perfectly adapted.
If liquid has been spilled, absorb it immediately to the risk of marking your floor.
To avoid scratches, we recommend placing a doormat at the entrance of the house. Place felt pads under furniture legs and avoid high heels.
After a few years, you may want to renovate your floor. In this case, sand it lightly and finish with a varnish, a lacquer, oil or wax.
Vinyl : Instalation
To ask a vinyl floor, carefully lift the greater width and greater length of your room, in meters and centimeters. At these dimensions, you should add 10 cm in all directions in order to properly adjust your vinyl flooring as many walls are not straight. Depending on circumstances, our vinyl is sold in widths 2, 3, 4 or 5 meters. If the width of your room is smaller than the width of the vinyl: a single band will do, laying the vinyl floor is facilitated.
If your part requires several bands of vinyl, calculate your needs by directing perpendicular to the light fittings or in less visible areas.Be careful to ask all the bands in the same direction to avoid reflections of the differences from one band to another. If your vinyl has reasons to connect, allow an additional ground in each direction.
Prepare your soil
The surface on which you place your vinyl floor must be completely dry and flat. If necessary, trim your soil with a layer of leveling compound before laying the vinyl floor.
Ask your vinyl floor
The installation of your vinyl floor is an important step because the end result of your soil depends on the result of the quality of the installation.
In general, for many be a vinyl floor, better stick it right in to prevent it from moving or not to relax. In rooms with moderate way, the double-sided adhesive may suffice.
By following a few steps below, the installation of your vinyl floor will be no problem:
Clean your floor and if possible, remove the baseboard so that the vinyl can be spread to the walls.
Roll your vinyl floor and adjust it by making up a few inches on each wall.
Wrap your new vinyl to the center of the room and cover the floor with glue using a spatula. Be sure to use the adhesive recommended with each vinyl.
Once the glue is applied, pull down your vinyl and rub well from the center to the walls.
Do the same for the other half of the room.
When the glue is made, cut the excess vinyl with a cutter.
You just have to put the baseboards and lay the rod threshold.
Properly maintain your vinyl
Nothing is easier than maintaining a vinyl! To clean the vinyl floor in everyday life, a broom, vacuum cleaner or damp cloth is sufficient.
After asking your vinyl floor, we recommend cleaning with soapy water then rinse.
For more effective cleaning, use the mop and warm water and a mild detergent. Never apply wax solvent, or ammonia or solvents. Also avoid steam cleaner on vinyl floors.
Oil stains, grease, lemon, vinegar should be treated promptly because these could cause discoloration or assaulting the surface of your soil.
Never place objects rubber (floor mats, tires) on soils Vinyl: Brown signs may appear after a chemical reaction.
Finally you will avoid fingerprints by sticking felt pads under the feet of chairs, tables and other furniture.
Parquet Flooring
Beyond aesthetics, the choice of a wood floor is also based on its qualities ”technical”. Each blade is unique and every type of wood has its own characteristics: hardness, durability, impact resistance and appearance. Entirely made of wood, the name “Parquet“ is reserved for products which the wear layer (top of the blade) is composed of at least 2.5-mm fine wood.
Hardwood or parquet?
The parque
t is the result of the assembly of three layers of wood:the top layer of fine wood also known as “siding” (2) receives the finishing (1): natural look, brushed, matte, smoked, pickled, varnished or oiled the central core (3) the floor is made of slats or particle board orfiber high-density against the siding, (4) or against-swing, usually composed of a layer of resinous wood, used to stabilize the blade.
The hardwood floors are ideal for floating installation. More andmore floors are offered with “click-system” blade assemblyensuring a quick and easy installation without glue or tools.
Vinyl Flooring
Choose vinyl flooring, in addition to aesthetics, many other criteria will also guide your choice such as the thickness of the wear layer, ease of maintenance, wear resistance, the folder, the surface finish.
The quality of a vinyl floor depends mainly on the number of layers that compose it: the file (1), the stabilization layer of fiberglass (2), relief (3), drawing (4) and the layers wear and finishing (5 and 6).
In general, the higher the vinyl floor is thick over the sound and heat insulation is good. The total thickness of the product is important in this regard.
The wear layer is the layer on which we walk. It provides information on the strength of the vinyl. Plus it is thick, vinyl is more resistant to wear. Density (or weight per m²) of the product also improves the resistance: the higher the vinyl floor is hard and compact, the more wear resistance and indentation are strong.
Surface treatments provide other advantages: ease of maintenance treatment, increasing the resistance, to prevent the traces, stains, scratches, yellowing, anti-slip. According to the piece and use the soil you have vinyl, so you can choose the most appropriate treatment.
Increasingly often, the surface of the vinyl is “embossed” or “grainy”. This technique allows a return appearance and a very natural terrain: the texture of the veining in the case of a decorated floor, dips and bumps in the case of a decorated terracotta. The effect thus obtained is surprising authenticity.
The technical characteristics of each soil vinyl and ensure you are given the best possible choice:
In terms of use: home or office, moderate, normal, large or heavy. Classifications certified by the UPEC binding on the performance of vinyl floors. The index is based on increasing severity of use of the premises. Examples: for home use U2SP2 room / living room, office U3P3 for use …
In terms of fire resistance test sought particularly in the context of a commercial or office, the indication is the M3 anti-fire.
Other concepts exist such as the compatibility of the vinyl with a system of floor heating, use in wet areas, the anti-static .In terms of widths: 2, 3, 4 and even 5 meters wide